油菜钵苗移栽机成穴器外形优化试验研究

doi:10.13304/j.nykjdb.2020.0914

中国农业科技导报 ›› 2021, Vol. 23 ›› Issue (10): 97-106.DOI: 10.13304/j.nykjdb.2020.0914

油菜钵苗移栽机成穴器外形优化试验研究

全伟1,2,吴明亮1*,官春云3,罗海峰1

1.湖南农业大学机电工程学院，长沙 410128； 2.湖南农业大学东方科技学院，长沙 410128； 3.湖南农业大学，国家油料改良中心湖南分中心，长沙 410128

收稿日期:2020-10-29 接受日期:2021-03-03 出版日期:2021-10-16 发布日期:2021-10-11
通讯作者: 吴明亮 E-mail：mlwu@hunau.edu.cn
作者简介:全伟 E-mail：B20170022@126.com
基金资助:
国家油菜产业技术体系项目(CARS-12)；

湖南省自然科学基金青年基金项目（2020JJ5254）；

湖南省科技厅重点项目（2019NK2151）；

湖南农业大学“双一流”建设项目（SYL201802018）

Experimental Study on the Shape Optimization of Soil Opener for Rapeseed Pot Seedling Transplanter

QUAN Wei1,2, WU Mingliang1*, GUAN Chunyun3, LUO Haifeng1

1.College of Mechanical and Electrical, Hunan Agricultural University, Changsha 410128, China; 2.College of Orient Science & Technology, Hunan Agricultural University, Changsha 410128, China; 3.National Center of Oilseed Crops Improvement, Hunan Branch, Hunan Agricultural University, Changsha 410128, China

Received:2020-10-29 Accepted:2021-03-03 Online:2021-10-16 Published:2021-10-11

摘要/Abstract

摘要： 为了降低油菜钵苗移栽机成穴器的入土阻力及穴内回土量，根据油菜钵苗移栽的农艺要求，结合垂直入土成穴作业的特点，开展了成穴器外形优化研究。以油菜钵苗移栽机成穴器外形（方锥台形、圆柱台形、正菱台形）、下端尺寸、入土深度为试验因素，利用离散元法对成穴过程进行仿真分析，以成穴器的入土阻力与穴内截面回土系数为指标评价各试验因素对成穴作业质量的影响。仿真结果表明，较优的成穴器外形为圆柱台形，所成孔穴上端尺寸为72 mm，有效深度为43 mm，入土阻力为62.8 N，穴内截面回土系数为0.07。结合物理试验对成穴器作业性能进行验证，结果表明，孔穴上端尺寸、有效深度、入土阻力和穴内截面回土系数的试验结果与仿真结果之间的误差平均值分别为5.7%、6.9%、5.3%、22.2%。结果表明，优化后的成穴器外形及参数组合合理，所成孔穴满足设计要求。

关键词: 油菜钵苗, 移栽, 成穴器, 外形, 离散元法

Abstract: In order to reduce the soil opening resistance of soil opener and the soil return coefficient in the hole section of rapeseed pot seedling transplanter,according to the agronomic requirements of rapeseed pot seedling transplanting and characteristics of vertical soil opening, the shape optimization of soil opener was studied.The shape of soil opener for rapeseed pot seedling transplanter(square cone, cylindrical, square rhomboid), bottom size of soil opener, and soil opening depth were chosen as the experiment factors and discrete element method was used for simulation analysis of soil opening process. The longitudinal section size and top size of the hole formed by the soil opener were compared and analyzed, and the influence of various experiment factors on the quality of the soil opening operation was analyzed by taking the soil entry resistance and the soil return coefficient of the internal section of the soil opener as evaluation indexes.The simulation results showed that among the three kinds of soil opener shape, the optimal one was cylindrical, followed by square cone and square rhomboid. The upper size of the holes formed by the cylindrical soil opener was 72 mm, the effective depth was 43 mm, the soil entry resistance during the soil opening process was 62.8 N, and the soil return coefficient of the internal section of the holes formed was 0.07.Combined with the soil groove verification experiment and the soil entry resistance experiment of the soil opener on the universal testing machine, the operation performance of the soil opener was verified. The test results showed that the error values between the test results and the simulation results of the hole upper size, effective depth, and soil return coefficient of the internal section were 57%, 6.9%, 5.3% and 22.2%, respectively. The experimental results showed the optimized of soil opener shape and the combination of parameters were reasonable, and the holes that met the design requirements.

Key words: rape seedlings, transplants, soil opener, shape, discrete element method

中图分类号:

S223.92

全伟, 吴明亮, 官春云, 罗海峰. 油菜钵苗移栽机成穴器外形优化试验研究[J]. 中国农业科技导报, 2021, 23(10): 97-106.

QUAN Wei, WU Mingliang, GUAN Chunyun, LUO Haifeng. Experimental Study on the Shape Optimization of Soil Opener for Rapeseed Pot Seedling Transplanter[J]. Journal of Agricultural Science and Technology, 2021, 23(10): 97-106.

[1]	冯长龙, 黄春光, 宁辰阳, 李树平, 陈科锦. 植树机挖坑机构螺旋式钻头性能特性优化研究[J]. 中国农业科技导报, 2025, 27(2): 89-98.
[2]	顿国强, 吴星澎, 纪欣鑫, 张福利, 纪文义, 杨永振. 双摆盘式大豆小区排种器的仿真优化[J]. 中国农业科技导报, 2024, 26(6): 82-90.
[3]	阿什日轨, 张荣萍, 周宁宁, 冯婷煜, 周林, 马鹏, 阿尔力色, 廖雪环, 张坷塬. 硅钙钾镁肥和密度对水稻产量形成的影响[J]. 中国农业科技导报, 2024, 26(3): 155-163.
[4]	黄元昊, 全腊珍, 胡广发, 全伟, 石方刚. 多种材料与不同含水率土壤的离散元接触参数标定[J]. 中国农业科技导报, 2024, 26(3): 98-109.
[5]	马紫涛, 赵智豪, 全伟, 石方刚, 高晨, 吴明亮. 基于EDEM的水稻残茬秸秆离散元仿真参数标定[J]. 中国农业科技导报, 2023, 25(11): 103-113.
[6]	闫建伟, 魏松, 胡冬军, 刘启合, 张富贵. 白萝卜种子颗粒模型离散元接触参数标定与试验[J]. 中国农业科技导报, 2022, 24(5): 119-128.
[7]	刘娜1,王彦1,赵晨阳2,郭俊先2. 日光温室辣椒机械化移栽可行性研究[J]. 中国农业科技导报, 2021, 23(2): 96-104.
[8]	兰宇辰1,郭晓红1*,李猛2,赵洋3,李晓蕾3,姜红芳1,王鹤璎1,徐令旗1,张晓宁1,吕艳东1. 施氮量与移栽密度互作对垦粳7号稻米品质的影响[J]. 中国农业科技导报, 2021, 23(1): 136-145.
[9]	谭京红,吴启侠*,朱建强,柯鑫瑶,马泓雨. 江汉平原麦后移栽棉适宜施氮量研究[J]. 中国农业科技导报, 2020, 22(9): 122-131.
[10]	向伟1,2,吴明亮1*,吕江南2,马兰2,全伟1,刘佳杰2,肖乐3. 基于EDEM的油菜移栽成穴装置作业性能仿真与试验研究[J]. 中国农业科技导报, 2019, 21(7): 70-81.
[11]	李子绅1,张常兴2,张锦中2,朱殿峰2,郭泽1,王英锋1,崔国杰2,肖和友3,代晓燕1*. 不同起垄方式对植烟土壤物理特性及烤后烟叶产质量的影响[J]. 中国农业科技导报, 2019, 21(12): 151-158.
[12]	马春英1,张永升2,侯俊玲3,王文全3,4. 移栽密度对知母生长性状及药用活性成分含量的影响[J]. 中国农业科技导报, 2017, 19(6): 106-110.
[13]	张江林,侯文峰,鲁剑巍,任涛,丛日环,李小坤*. 不同施氮量和移栽密度对水稻产量及灌浆特性的影响[J]. 中国农业科技导报, 2017, 19(2): 75-85.

油菜钵苗移栽机成穴器外形优化试验研究

Experimental Study on the Shape Optimization of Soil Opener for Rapeseed Pot Seedling Transplanter

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 13

编辑推荐

Metrics